Concrete cutting in Bridgeport CT - clean openings right where you need them
Need an opening cut in a slab or wall for a pipe, drain or doorway? We scan first, then cut it straight and clean.
- Licensed and fully insured.
- Free quotes on site.
- Expect a reply within 1 business day.
What is concrete cutting and when do you need it?
Concrete cutting in Bridgeport, CT means sawing straight lines through a slab or wall, or drilling round holes, so new pipes, drains, conduit or a doorway can get through concrete that's already in place.
Usually something new has to get through old concrete, like a drain line under a basement floor, power run out to a shed, or a sunken section of driveway that has to come out before a new pour. The price moves with how thick the concrete is, how much steel is inside it, how long the cut runs, how easy it is to reach, and whether you want the pieces broken out and hauled away. The schedule turns on the scan, any permit your job needs and, for outside work, the weather, and the written estimate I give you after a visit puts a figure on your own job.
What tells you a slab or wall needs cutting?
One section sank or cracked
If one panel of your driveway or walk has dropped or split while the rest sits fine, the ground under that part usually settled or washed out. Cutting it out on a straight line lets us fix just that section, and the longer it sits, the more water gets under it and the worse the trip edge gets.
A new line crosses the floor
A basement bathroom, a sump or a new drain usually means a trench through the slab. Broken out with a hammer instead of sawn, the edges come out ragged and cracks can run well past the trench, which makes the patch harder and the floor weaker.
You want a door in the foundation
A walkout door or a bigger basement window means cutting into a wall that's holding up your house. That opening needs support in place before the cut, so it's a job to plan carefully, not one to start with a rented saw on a Saturday.
How we handle concrete cutting, from the scan to cleanup
I start by measuring and marking the cut line, because a straight, square edge is easier to patch or build against later. We scan the area before any blade touches it so we know where the rebar, the steel bars that hold a slab together, and any buried lines sit, then pick the saw by where the concrete is and how thick it is. We cut along the mark, break out the pieces and haul them off when that's part of your job, and clean up so the next trade walks into a square, ready opening.
A lot of our cutting is the first step of other work. When one section of a driveway has sunk or cracked, we cut it out on a clean line and pour it back as part of our concrete driveway building, and a patio that needs a section replaced or widened gets the same treatment through our concrete patio construction.
Flat saw for floors and driveways
A walk-behind saw rides on the slab and cuts driveways, patios, garage floors and basement floors. It makes long, straight lines, so it suits trenches and section cut-outs.
Wall saw for foundation walls
This saw runs on a track fastened to the wall, so the cut stays straight on a vertical face. For very thick or heavily reinforced sections, a wire saw does the job instead.
Hand saw for tight spots
A handheld saw reaches corners, stairs and spots a bigger saw can't fit. It suits short cuts and finishing the ends of a long one.
Core drilling for round holes
A drill with a hollow bit cuts a clean round hole through a floor or wall for a pipe, drain or conduit. It's the neat way to get one line through without opening a whole trench.
Get a written price for your concrete cutting job
Send the form and we'll reply within one business day to set up a free estimate on site. There's no obligation, and you get the price in writing with what's included spelled out.
(475) 225-2242- Based in
- Bridgeport, CT 06604
- Hours
- Mon–Fri: 6 AM–10 PM, Sat–Sun: 7 AM–11 PM
What happens after you call about concrete cutting in Bridgeport?
Here's how a cutting job runs from your first call to the final walk-through, and who you'll deal with at each step.
Call or send a request
Call (475) 225-2242 or use the form, and we'll get back to you to set up a visit. It helps to have ready where the cut sits, slab or wall, its rough length, and whether you want the pieces removed.
I visit, measure and mark
I come out myself, look at the site, measure the cut and go over any permit questions for your job. You then get a written estimate that lists what's included, so you're comparing quotes for the same work.
We scan, then we cut
Once you say go, we take care of the permit side if the job needs one and scan the area before the saw starts. Our own crew does the cutting, and outside work goes on a day the weather allows.
Walk the finished job together
When the cut is done and the site is cleaned up, we walk it with you. You see the openings and edges before we pack up.
Why Bridgeport owners call J&R for concrete cutting
I measure and quote it myself
I do every site visit and estimate myself, and our own crew does the cutting. You talk to the person who marked the line, not someone who handed it off.
Paperwork you can check
We're licensed and fully insured. Connecticut's Department of Consumer Protection oversees registration of home improvement contractors, so it's fair to ask any crew you're comparing to show you theirs.
Careful work since 2017
I started this business in 2017 after learning the trade on other crews, and I check a cut line against the mark before the blade goes in. A cut can't be undone, so that care is most of the job.
On a cutting job, the thing that matters most is knowing what's inside the concrete before the saw starts. Book an estimate visit and I'll come measure and mark it with you.
Concrete cutting and the slab work around it in Bridgeport
In Bridgeport, it's on you as the property owner to make sure your contractor has a permit before work begins, so it's worth asking anyone you hire. The city's Building Department requires a permit to alter, repair, enlarge, move or demolish an existing building or structure, and a new opening in a foundation wall or a trench through a basement floor can fall under that, so I check your job against the rule at the estimate visit instead of guessing. When it needs one, we file the application as your contractor, with the registration card and workers' compensation certificate the city asks for, and show you the permit before we cut.
Around Bridgeport we see a lot of older houses with basements where a new bathroom or drain means a trench through the floor, and driveways where one section has settled and needs to come out on a clean line. The same calls come in from Stratford and Fairfield, and we work in many cities around Bridgeport, so if yours isn't listed, call and ask.
Questions about concrete cutting in Bridgeport
How much does concrete cutting cost per foot in Bridgeport, CT?
Saw cutting a concrete slab usually costs about $4 to $15 per linear foot across the US, and that range covers the sawing, not breaking out or hauling the pieces. Reinforced or thicker slabs land higher per foot than thin, easy-to-reach ones, and on a small job the charge for bringing the crew and saws out can set most of the price. I'll put a figure on your own job in a written estimate after I see it.
Does a concrete cutting quote include hauling the concrete away?
Not always, because sawing and removal are separate jobs, and breaking, hauling and disposing of the pieces can cost more than the cutting itself. When you compare quotes, ask each one whether removal is in it so both prices cover the same work. Ours says plainly whether breaking out and hauling is included.
Who issues building permits in Bridgeport, CT?
The city's Building Department issues building permits in Bridgeport. It's open Monday to Friday, 7:00 am to 4:00 pm, at 203-576-7225 if you want to check on a permit for your property.
What is the best way to find pipes or wires in a slab before cutting?
A ground-penetrating radar scan, GPR for short, is the usual first step because it shows that something sits inside the concrete and how deep it is. It can't tell whether a line carries electrical wiring, water or gas, so the scan alone leaves that question open. When ours can't show what a line carries, I tell you and we look into it further before cutting.
How do I cut a doorway into a basement foundation wall?
One cutting guide's order is to cut the pocket for the lintel first, set the lintel, which is the beam that carries the wall over the opening, and only then cut the doorway below it. That way the wall above is supported before anything under it comes out. For any basement cut, ask the crew how its saw is powered before work starts, because gasoline saws build up carbon monoxide indoors and OSHA has documented a basement job where workers died from it.
Do I need to call before you dig after a concrete slab is cut in CT?
Yes, if the digging is done with power equipment, the excavator has to call Connecticut's central clearinghouse at least two full days ahead, not counting Saturdays, Sundays and holidays, unless it's an emergency. So a trench under a cut floor or driveway waits for that call, and those days belong in your schedule.
Related concrete work that often follows a cut
When a sunken section of driveway comes out, the new pour needs a packed base and cut joints so it stays flat and cracks where planned.
If you're widening a patio or replacing a cracked part, sawing a clean line gives the new slab a square edge to meet and leaves the rest sound.
Service areas for concrete cutting near Bridgeport
J&R Bridgeport Concrete Construction is based in Bridgeport, CT, and we cut concrete for homeowners in Milford, Norwalk and other cities nearby. The 12 cities below each have their own page.
Bridgeport, CT
Get your concrete cutting job measured
Measuring now lets us line up the scan, any permit and the right saw before your plumber or electrician needs the opening.